February 25, 2011 New Air Vent Inc. Gable Attic Ventilator 53315 Attic And Whole House Fans
Air Vent Inc. Gable Attic Ventilator 53315 Attic And Whole House Fans
Check Price, Read Full Product Information and Customer Reviews.
Product information :
ATTIC AIRE" GABLE MOUNT POWER FAN *1050 CFM *14" fan blade *15" dia. housing *1/12 HP, 180W 3.2 amps *Adjustable thermostat from 60 - 120 degrees *Use with automatic cable shutter Ace No. 5099338 *For 1500 sq. ft. max. *4.4 sq. ft. of intake air needed *10 year limited warranty *2 yr. Surestart warranty *UL listed
Read More.
Tags : Air, Vent, Inc, Gable, Attic
Disclaimer :
- 0 comments
-
Posted under
Vent
February 25, 2011 36 in. Heavy Duty High Volume 2 Speed Belt Drive Whole House Fan
36 in. Heavy Duty High Volume 2 Speed Belt Drive Whole House Fan
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Whole House Fan, Heavy Duty Belt Drive, 2 Speed, Propeller Dia 36 In, CFM High 9700, CFM Low 6300, HP 1/3, Fan RPM 400/275, Voltage 115, 60 Hz, Single Phase, Amps 6.7/4.0, Height 22 In, Width 40 In, Depth 40 In, Ceiling Mounting Location, Includes 2-speed Wall Switch and White Shutter
Read More.
Tags : 36, in, Heavy, Duty, High
Disclaimer :
- 0 comments
-
Posted under
in
February 25, 2011 Cool Attic CX2121 Automatic Gable Vent Shutter High Impact One-piece ABS Cycolac Frame
Cool Attic CX2121 Automatic Gable Vent Shutter High Impact One-piece ABS Cycolac Frame
Check Price, Read Full Product Information and Customer Reviews.
Product information :
This Cool Attic Automatic Gable Vent Shutter has a high Impact one-piece ABS Cycolac frame. It is used with the CX1500 or CX1600 gable vents. It is not made for the VX2515Solargabl solar gable fan. The louvers will open automatically when the ventilator is operating. When the ventilator is off, the louvers close to keep out insects, rain and dust. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100% powered by wind generated power, 95% of all waste products are recycled and the packaging is recycled cardboard.
Read More.
Tags : Cool, Attic, CX2121, Automatic, Gable
Disclaimer :
- 0 comments
-
Posted under
Gable
February 25, 2011 Solar Attic Fan 30-watt with 25-Year Warranty
Solar Attic Fan 30-watt with 25-Year Warranty
Check Price, Read Full Product Information and Customer Reviews.
Product information :
The Solar Attic Fan is a simple and environmentally sensible solution that can save you money. Powered completely by free solar energy, this sleek and efficient vent is both compact and quiet. Fully operational right from the box, it installs easily, with no electrical wiring, no expensive electrician and city permits. And let's not forget powerful! A single 30 watt unit can fully vent up to 2,500 square feet, operating at up to 1,550 cfms. Place it wherever you need improved circulation; attics, lofts, workshops, storage sheds, garages, even barns.
Attic venting is an important aspect in maintaining a healthy energy efficient home. Proper venting cools your roof extending the material life and reduces the load on your air conditioning system. Attic venting also increases fresh air circulation which reduces vapor build up generated by every day activities like showering and cooking.
Excess moisture trapped in your attic can cause a variety of problems from rust and rot to increased bacteria and mold counts which can have a direct impact on your respiratory health! Passive vents have been a part of building codes for years. Soffit vents, ridge vents and louvers rely on nature to provide sufficient air pressure and air movement. So the majority of the time your attic is stagnant and continues to build up heat and moisture.
The 30-watt Natural Light Solar Attic Fan exhausts up to 1,550 CFM, and up to 2,500 square feet of attic space. No wiring needed. Lower your electricity consuption using this high quality solar powered attic exhaust fan today!
Note: If you live in a climate that regularly goes below 70 degrees Fahrenheit during any part of the year, (most of the US) you'll also want a thermostat switch, purchased separately here.
Read More.
Tags : Solar, Attic, Fan, 30watt, with
Disclaimer :
- 0 comments
-
Posted under
with
February 25, 2011 The 2011-2016 World Outlook for Manufacturing Attic Fans Industrial and Commercial Fans and Blowers ...
The 2011-2016 World Outlook for Manufacturing Attic Fans Industrial and Commercial Fans and Blowers Commercial Exhaust Fans and Commercial Ventilating Fans
Check Price, Read Full Product Information and Customer Reviews.
Product information :
WHAT IS LATENT DEMAND AND THE P.I.E.? The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The "market" is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability). The latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market. For reasons discussed later, this report does not consider the notion of "unit quantities", only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends) and not adjusted for future dynamics in exchange rates. If inflation rates or exchange rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (when expressed in U.S. dollars, not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand. As mentioned in the introduction, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. If fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be an international latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans at the aggregate level. Product and service offering details, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand. THE METHODOLOGY In order to estimate the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans on a worldwide basis, I used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, I heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a country, city, state, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium is realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question. Ignoring, for the moment, exogenous shocks and variations in utility across countries, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled "A" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data across countries). This type of consumption function is show as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant. Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles. In the long-run, however, the propensity to consume is more constant. Similarly, in the long run, households, industries or countries with no income eventually have no consumption (wealth is depleted). While the debate surrounding beliefs about how income and consumption are related and interesting, in this study a very particular school of thought is adopted. In particular, we are considering the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans across some 230 countries. The smallest have fewer than 10,000 inhabitants. I assume that all of these counties fall along a "long-run" aggregate consumption function. This long-run function applies despite some of these countries having wealth, current income dominates the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans. So, latent demand in the long-run has a zero intercept. However, I allow firms to have different propensities to consume (including being on consumption functions with differing slopes, which can account for differences in industrial organization, and end-user preferences). Given this overriding philosophy, I will now describe the methodology used to create the latent demand estimates for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans. Since ICON Group has asked me to apply this methodology to a large number of categories, the rather academic discussion below is general and can be applied to a wide variety of categories, not just manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans. Step 1. Product Definition and Data Collection Any study of latent demand across countries requires that some standard be established to define "efficiently served". Having implemented various alternatives and matched these with market outcomes, I have found that the optimal approach is to assume that certain key countries are more likely to be at or near efficiency than others. These countries are given greater weight than others in the estimation of latent demand compared to other countries for which no known data are available. Of the many alternatives, I have found the...
--This text refers to the
Digital
edition.
Read More.
Tags : The, 20112016, World, Outlook, for
Disclaimer :
- 0 comments
-
Posted under
World
February 25, 2011 Air King BFQ 90 High Performance Bath Fan 90-CFM
Air King BFQ 90 High Performance Bath Fan 90-CFM
Check Price, Read Full Product Information and Customer Reviews.
Product information :
What makes the Air King high performance bath fan series unique is the UL listed molded high impact plastic housing that provides multiple benefits. "Traditional" bath fan housings are fabricated from steel which involves bending and welding. This is a more expensive process and over the life of the fan welds can break, causing the fan to operate much louder or even with a rattling sound. Metal housings reverberate and echo noise. Because the Air King high performance bath fan is in an all plastic housing, there are no welds to break and the plastic is a natural sound absorbent material. If you live anywhere near salt water, or the unit will be used in high moisture areas, this fan is an almost must. The UL listed molded high impact plastic housing will not rust, giving the unit a longer life. The high performance exhaust fan series features a unique snap-in installation system. The included bracket nails or screws to the ceiling joist allowing the fan housing to "snap-in". This is so simple you can even replace an existing fan without having to rip out large sections of ceiling or climbing into the attic. Connect the wiring and the ducting, install the easy fitting grill and you are done. A bath fan installation can now be done in minutes instead of hours. The motors are suitable for continuous operation. The 4-inch plastic duct collar with back draft damper insures quiet operation and prevents drafts from entering the room. UL listed for use over a tub or shower when installed in a GFCI protected branch circuit. This unit features a 90-CFM blower at 2.5-sone which makes for quiet operation. Exhaust capacity for rooms of approximately 90-square-feet. Housing size: 9-1/16-inch wide-by-8-1/2-inch deep-by-4-3/4-inch high.
Read More.
Tags : Air, King, BFQ, 90, High
Disclaimer :
- 0 comments
-
Posted under
King
February 25, 2011 Broan 355BK 1200 CFM Roof Mount Powered Attic Ventilator Black PVC Dome
Broan 355BK 1200 CFM Roof Mount Powered Attic Ventilator Black PVC Dome
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.
Read More.
Tags : Broan, 355BK, 1200, CFM, Roof
Disclaimer :
- 0 comments
-
Posted under
Roof
February 25, 2011 Lasko Electrically Reversible Window Fan 16 Inches 2155A
Lasko Electrically Reversible Window Fan 16 Inches 2155A
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Install the Lasko Electrically Reversible Window Fan and enjoy the cool air circulated through 2 to 3 rooms. Exclusive Storm Guard features lets you close the window behind the fan for safety and security during bad weather or while you’re away. The quiet 3-speed fan uses an electrically reversible motor that operates powerful 16-inch 3-paddle blades. Fits windows 22 inches high and up and 26 to 34 inches wide. 8.3 x 26.5 x 22 inches. Made in U.S.A.
Read More.
Tags : Lasko, Electrically, Reversible, Window, Fan
Disclaimer :
- 0 comments
-
Posted under
Window
February 25, 2011 MaxxAir IF14 1400-CFM 14-Inch Blade Heavy-Duty Exhaust Fan with Integrated Shutter
MaxxAir IF14 1400-CFM 14-Inch Blade Heavy-Duty Exhaust Fan with Integrated Shutter
Check Price, Read Full Product Information and Customer Reviews.
Product information :
The MaxxAir 1400 CFM Heavy-duty Exhaust Fan with Shutter and PSC Energy Efficient Thermally Protected Motor and 14-Inch fan blade can be used for a variety of uses. It can be used in barns, greenhouses and other commercial applications. It helps remove unwanted odors, contaminants, excess moisture or heat. The shutter opens and closes automatically. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100% powered by wind generated power, 95% of all waste products are recycled and the packaging is recycled cardboard.
Read More.
Tags : MaxxAir, IF14, 1400CFM, 14Inch, Blade
Disclaimer :
- 0 comments
-
Posted under
MaxxAir
February 25, 2011 Broan 433 Automatic Shutter for Gable Mount Powered Attic Ventilator
Broan 433 Automatic Shutter for Gable Mount Powered Attic Ventilator
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.
Read More.
Tags : Broan, 433, Automatic, Shutter, for
Disclaimer :
- 0 comments
-
Posted under
Shutter
February 25, 2011 The 2009 Report on Manufacturing Attic Fans Industrial and Commercial Fans and Blowers Commercial Ex...
The 2009 Report on Manufacturing Attic Fans Industrial and Commercial Fans and Blowers Commercial Exhaust Fans and Commercial Ventilating Fans: World Market Segmentation by City
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Market Potential Estimation MethodologyOverviewThis study covers the world outlook for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans across more than 2000 cities. For the year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the city in question (in millions of U.S. dollars), the percent share the city is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a city vis-a-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the cities of the world). This study gives, however, my estimates for the worldwide latent demand, or the P.I.E. for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans. It also shows how the P.I.E. is divided across the world's cities. In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on international strategic planning at graduate schools of business.What is Latent Demand and the P.I.E.?The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The "market" is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).The latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a city market. Another reason why sales do not equate to latent demand is exchange rates. In this report, all figures assume the long-run efficiency of currency markets. Figures, therefore, equate values based on purchasing power parities across countries. Short-run distortions in the value of the dollar, therefore, do not figure into the estimates. Purchasing power parity estimates of country income were collected from official sources, and extrapolated using standard econometric models. The report uses the dollar as the currency of comparison, but not as a measure of transaction volume. The units used in this report are: US $ mln.For reasons discussed later, this report does not consider the notion of "unit quantities", only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends) and not adjusted for future dynamics in exchange rates (i.e., the figures reflect average exchange rates over recent history). If inflation rates or exchange rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (when expressed in U.S. dollars, not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand.As mentioned earlier, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. If fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be an international latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans at the aggregate level. Product and service offering details, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand.The MethodologyIn order to estimate the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans on a city-by-city basis, I used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, I heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a country, city, state, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium in realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question. Ignoring, for the moment, exogenous shocks and variations in utility across countries, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled "A" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data across countries). This type of consumption function is show as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant. Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles. In the long-run, however, the propensity to consume...
--This text refers to the
Digital
edition.
Read More.
Tags : The, 2009, Report, on, Manufacturing
Disclaimer :
- 0 comments
-
Posted under
The
February 25, 2011 Solar Attic Fan 20-watt with 25-year warranty
Solar Attic Fan 20-watt with 25-year warranty
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Natural Light 20-watt Solar Attic Fan Features:
The environmentally sensible solution that can protect your home and save you money!
EASY INSTALLATION - NO WIRING
? Reduces cooling load on AC units
? Operates on free solar energy
? Adjustable solar panel
? Three models available to fit all roof types
? Powder coated aircraft grade aluminum
? Best warranty in the industry
25-year warranty on solar panel
25-year warranty on housing
25-year warranty on motor
Warranty from Natural Light.
SOLAR ATTIC FAN WITH 20 WATT MODULE. INCREASES CFM TO 1200.
Venting capacity of 1800 square feet of attic space per fan.
The 20 watt solar panel is 16.5" x 19.75"
This solar unit may qualify for the 30% federal solar tax credit.
Begin saving electricity today!
Read More.
Tags : Solar, Attic, Fan, 20watt, with
Disclaimer :
- 0 comments
-
Posted under
with
February 25, 2011 Broan Model 505 8-Inch Vertical Discharge Utility Fan 180 CFM 6.5 Sones
Broan Model 505 8-Inch Vertical Discharge Utility Fan 180 CFM 6.5 Sones
Check Price, Read Full Product Information and Customer Reviews.
Product information :
The Broan/Nautilus 180 cfm vertical discharge fan helps eliminate humidity from laundry rooms, tobacco smoke from rec rooms and workshops, or cooking fumes from kitchens. The fan is capable of filtering 180 cubic feet of air per minute at 6.5 sones, and the 8-1/4-inch-by-7-inch housing fits an 8-inch round duct. The fan comes complete with a built-in damper to minimize backdrafts and is designed for vertical use only. The fan is backed with a 1-year limited manufacturer's warranty.
Read More.
Tags : Broan, Model, 505, 8Inch, Vertical
Disclaimer :
- 0 comments
-
Posted under
Vertical
February 25, 2011 Honeywell 527SHON100BLK 12-Watt Roof Mount Solar Powered Attic Fan
Honeywell 527SHON100BLK 12-Watt Roof Mount Solar Powered Attic Fan
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Honeywell 12 Watt Roof Mount Solar Attic Fan Help reduce energy usage by exhausting hot air from attics by using a solar powered attic fan. Reduce potential mold and increase roof life by exhausting moist air. A whisper quiet 24 volt motor is powered by an industrial grade 12 watt solar panel that is thermostatically controlled; if the conditioned space reaches 85 degrees, the motor turns on, and once it cools to 65 degrees, it will shut off. Unit will condition up to 1250 square feet. Powered by solar energy, there is zero cost usage, and it does not require an electrician to install. The durable Grade 5 ASB shroud is impact and UV resistant. Shroud and panel are adjustable to maximize sun exposure. Oversized galvanized & powder coated flashing resists rust and protects against leaks. Wire mesh keeps unwanted rodents out. Limited 5 year warranty on the fan and 20 year warranty on the solar panel. May qualify for federal and/or local tax rebates.
Read More.
Tags : Honeywell, 527SHON100BLK, 12Watt, Roof, Mount
Disclaimer :
- 0 comments
-
Posted under
Roof
February 25, 2011 Honeywell 527SHON100BLK 12-Watt Roof Mount Solar Powered Attic Fan
Honeywell 527SHON100BLK 12-Watt Roof Mount Solar Powered Attic Fan
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Honeywell 12 Watt Roof Mount Solar Attic Fan Help reduce energy usage by exhausting hot air from attics by using a solar powered attic fan. Reduce potential mold and increase roof life by exhausting moist air. A whisper quiet 24 volt motor is powered by an industrial grade 12 watt solar panel that is thermostatically controlled; if the conditioned space reaches 85 degrees, the motor turns on, and once it cools to 65 degrees, it will shut off. Unit will condition up to 1250 square feet. Powered by solar energy, there is zero cost usage, and it does not require an electrician to install. The durable Grade 5 ASB shroud is impact and UV resistant. Shroud and panel are adjustable to maximize sun exposure. Oversized galvanized & powder coated flashing resists rust and protects against leaks. Wire mesh keeps unwanted rodents out. Limited 5 year warranty on the fan and 20 year warranty on the solar panel. May qualify for federal and/or local tax rebates.
Read More.
Tags : Honeywell, 527SHON100BLK, 12Watt, Roof, Mount
Disclaimer :
- 0 comments
-
Posted under
Roof
February 25, 2011 Air Vent Inc. 24 Whole House Fan 54301 Attic & Whole House Fans
Air Vent Inc. 24 Whole House Fan 54301 Attic & Whole House Fans
Check Price, Read Full Product Information and Customer Reviews.
Product information :
24" direct drive whole house fan with automatic shutter (4500 cfm) pulls air from a house size of 1500 square feet. 110v runs on high & low, with a 2 speed pull chain included. You do not have to cut joist when installing fan for easier installation. It needs 864 square inches of open exhaust vents in attic space. The automatic shutter is white and the rough opening is 27-3/4" x 29". There is a 10 year limited parts warranty and a 5 year limited labor warranty.
Read More.
Tags : Air, Vent, Inc, 24, Whole
Disclaimer :
- 0 comments
-
Posted under
Whole
February 25, 2011 Broan 35316 1600 CFM Gable Mount Powered Attic Ventilator
Broan 35316 1600 CFM Gable Mount Powered Attic Ventilator
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.
Read More.
Tags : Broan, 35316, 1600, CFM, Gable
Disclaimer :
- 0 comments
-
Posted under
Gable
February 25, 2011 1/10hp 1050RPM CW 5" Diameter 115 Volts Fasco # D144
1/10hp 1050RPM CW 5" Diameter 115 Volts Fasco # D144
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Shaded Pole Motor - Open Ventilation - Air Over. Application: Attic Exhaust, Attic Fan, Roof Top Ventilator
Read More.
Tags : 110hp, 1050RPM, CW, 5, Diameter
Disclaimer :
- 0 comments
-
Posted under
Diameter
February 25, 2011 Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators
Ventamatic XXDUOSTAT Adjustable Dual Thermostat/Humidistat Control for Power Attic Ventilators
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Dual thermostat/humidistat adjustable 10 amp control. For the energy efficient control of roof or gable power attic ventilators. Temperature range from 50 to 120 Degrees Fahrenheit. Humidity range from 30 to 90 percent.
Read More.
Tags : Ventamatic, XXDUOSTAT, Adjustable, Dual, ThermostatHumidistat
Disclaimer :
- 0 comments
-
Posted under
XXDUOSTAT
February 25, 2011 Whole House Fan Shutter - 24" - Interior Use
Whole House Fan Shutter - 24" - Interior Use
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Injection molded frame with smooth aluminum louvers that automatically open when fan turns on, and close when fan turns off to keep out air, insects, and dust. Interior Use.
Read More.
Tags : Whole, House, Fan, Shutter,
Disclaimer :
- 0 comments
-
Posted under
Whole
February 25, 2011 Solar Attic Fan 30-watt with 25-Year Warranty - Florida Rated
Solar Attic Fan 30-watt with 25-Year Warranty - Florida Rated
Check Price, Read Full Product Information and Customer Reviews.
Product information :
The Solar Attic Fan is a simple and environmentally sensible solution that can save you money. Powered completely by free solar energy, this sleek and efficient vent is both compact and quiet. Fully operational right from the box, it installs easily, with no electrical wiring, no expensive electrician and city permits. And let's not forget powerful! A single 30 watt unit can fully vent up to 2,500 square feet, operating at up to 1,550 cfms. Place it wherever you need improved circulation; attics, lofts, workshops, storage sheds, garages, even barns.
Attic venting is an important aspect in maintaining a healthy energy efficient home. Proper venting cools your roof extending the material life and reduces the load on your air conditioning system. Attic venting also increases fresh air circulation which reduces vapor build up generated by every day activities like showering and cooking.
Excess moisture trapped in your attic can cause a variety of problems from rust and rot to increased bacteria and mold counts which can have a direct impact on your respiratory health! Passive vents have been a part of building codes for years. Soffit vents, ridge vents and louvers rely on nature to provide sufficient air pressure and air movement. So the majority of the time your attic is stagnant and continues to build up heat and moisture.
The 30-watt Natural Light Solar Attic Fan exhausts up to 1,550 CFM, and up to 2,500 square feet of attic space. No wiring needed. Lower your electricity consuption using this high quality solar powered attic exhaust fan today!
Note: If you live in a climate that regularly goes below 70 degrees Fahrenheit during any part of the year, (most of the US) you'll also want a thermostat switch, purchased separately here.
Read More.
Tags : Solar, Attic, Fan, 30watt, with
Disclaimer :
- 0 comments
-
Posted under
with
February 25, 2011 Broan 358 1200 CFM Roof Mount Powered Attic Ventilator
Broan 358 1200 CFM Roof Mount Powered Attic Ventilator
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone’s ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council’s (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder’s (NAHB) Model Green Home Building Guidelines. Broan-NuTone’s inspiring heritage provides the foundation for its three award-winning, global brands – Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the “Ultimate in Kitchen Ventilation” featuring state-of-the-art performance and Italian design.
Read More.
Tags : Broan, 358, 1200, CFM, Roof
Disclaimer :
- 0 comments
-
Posted under
Roof
February 25, 2011 The 2009-2014 World Outlook for Manufacturing Attic Fans Industrial and Commercial Fans and Blowers ...
The 2009-2014 World Outlook for Manufacturing Attic Fans Industrial and Commercial Fans and Blowers Commercial Exhaust Fans and Commercial Ventilating Fans
Check Price, Read Full Product Information and Customer Reviews.
Product information :
WHAT IS LATENT DEMAND AND THE P.I.E.?The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The "market" is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).The latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.For reasons discussed later, this report does not consider the notion of "unit quantities", only total latent revenues (i.e., a calculation of price times quantity is never made, though one is implied). The units used in this report are U.S. dollars not adjusted for inflation (i.e., the figures incorporate inflationary trends) and not adjusted for future dynamics in exchange rates. If inflation rates or exchange rates vary in a substantial way compared to recent experience, actually sales can also exceed latent demand (when expressed in U.S. dollars, not adjusted for inflation). On the other hand, latent demand can be typically higher than actual sales as there are often distribution inefficiencies that reduce actual sales below the level of latent demand.As mentioned in the introduction, this study is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. If fact, all the current products or services on the market can cease to exist in their present form (i.e., at a brand-, R&D specification, or corporate-image level) and all the players can be replaced by other firms (i.e., via exits, entries, mergers, bankruptcies, etc.), and there will still be an international latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans at the aggregate level. Product and service offering details, and the actual identity of the players involved, while important for certain issues, are relatively unimportant for estimates of latent demand.THE METHODOLOGYIn order to estimate the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans on a worldwide basis, I used a multi-stage approach. Before applying the approach, one needs a basic theory from which such estimates are created. In this case, I heavily rely on the use of certain basic economic assumptions. In particular, there is an assumption governing the shape and type of aggregate latent demand functions. Latent demand functions relate the income of a country, city, state, household, or individual to realized consumption. Latent demand (often realized as consumption when an industry is efficient), at any level of the value chain, takes place if an equilibrium is realized. For firms to serve a market, they must perceive a latent demand and be able to serve that demand at a minimal return. The single most important variable determining consumption, assuming latent demand exists, is income (or other financial resources at higher levels of the value chain). Other factors that can pivot or shape demand curves include external or exogenous shocks (i.e., business cycles), and or changes in utility for the product in question. Ignoring, for the moment, exogenous shocks and variations in utility across countries, the aggregate relation between income and consumption has been a central theme in economics. The figure below concisely summarizes one aspect of problem. In the 1930s, John Meynard Keynes conjectured that as incomes rise, the average propensity to consume would fall. The average propensity to consume is the level of consumption divided by the level of income, or the slope of the line from the origin to the consumption function. He estimated this relationship empirically and found it to be true in the short-run (mostly based on cross-sectional data). The higher the income, the lower the average propensity to consume. This type of consumption function is labeled "A" in the figure below (note the rather flat slope of the curve). In the 1940s, another macroeconomist, Simon Kuznets, estimated long-run consumption functions which indicated that the marginal propensity to consume was rather constant (using time series data across countries). This type of consumption function is show as "B" in the figure below (note the higher slope and zero-zero intercept). The average propensity to consume is constant. Is it declining or is it constant? A number of other economists, notably Franco Modigliani and Milton Friedman, in the 1950s (and Irving Fisher earlier), explained why the two functions were different using various assumptions on intertemporal budget constraints, savings, and wealth. The shorter the time horizon, the more consumption can depend on wealth (earned in previous years) and business cycles. In the long-run, however, the propensity to consume is more constant. Similarly, in the long run, households, industries or countries with no income eventually have no consumption (wealth is depleted). While the debate surrounding beliefs about how income and consumption are related and interesting, in this study a very particular school of thought is adopted. In particular, we are considering the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans across some 230 countries. The smallest have fewer than 10,000 inhabitants. I assume that all of these counties fall along a "long-run" aggregate consumption function. This long-run function applies despite some of these countries having wealth, current income dominates the latent demand for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans. So, latent demand in the long-run has a zero intercept. However, I allow firms to have different propensities to consume (including being on consumption functions with differing slopes, which can account for differences in industrial organization, and end-user preferences).Given this overriding philosophy, I will now describe the methodology used to create the latent demand estimates for manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans. Since ICON Group has asked me to apply this methodology to a large number of categories, the rather academic discussion below is general and can be applied to a wide variety of categories, not just manufacturing attic fans, industrial and commercial fans and blowers, commercial exhaust fans, and commercial ventilating fans.Step 1. Product Definition and Data CollectionAny study of latent demand across countries requires that some standard be established to define "efficiently served". Having implemented various alternatives and matched these with market outcomes, I have found that the optimal approach is to assume that certain key countries are more likely to be at or near efficiency than others. These countries are given greater weight than others in the estimation of latent demand compared to other countries for which no known data are available. Of the many alternatives, I have found the assumption that the world's highest...
--This text refers to the
Digital
edition.
Read More.
Tags : The, 20092014, World, Outlook, for
Disclaimer :
- 0 comments
-
Posted under
World
February 25, 2011 Fan-Tastic Vent 01100WH Endless Breeze 12V Fan
Fan-Tastic Vent 01100WH Endless Breeze 12V Fan
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Endless Breeze 12 Volt Fan features instant air flow, portable, free-standing, compact, light-weight (under 5 pounds), multi-purpose, three speeds, low sound levels and low amp. Draw 12 volt plug with cord 12 inch ten blade rotary fan high air volume.
Read More.
Tags : FanTastic, Vent, 01100WH, Endless, Breeze
Disclaimer :
- 0 comments
-
Posted under
Vent
February 25, 2011 Panasonic FV-20NLF1 WhisperLine 240 CFM In-Line Fan 6-Inch Duct
Panasonic FV-20NLF1 WhisperLine 240 CFM In-Line Fan 6-Inch Duct
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Panasonic WhisperLine fans are designed for multiple-task ventilation. This means that you can ventilate multiple areas or multiple rooms with just one fan. For example, you can place inlets over the shower, tub, toilet and/or vanity in a single bathroom and still use just one fan. In recent years, homes have become more airtight and energy efficient. While this lowers the cost to heat and air-condition a home, it also retains pollutants that can be hazardous to its occupants. One way to improve the air quality of the home is through whole-house ventilation with a Panasonic WhisperLine fan which removes stale air and provides fresh air on a slow, continuous basis. The Panasonic FV-20NLF1 WhisperLine 240 CFM In-Line Fan has a totally enclosed condenser motor and a large, double suction blower wheel to quietly move air. The blower wheel is designed to draw air in from both sides allowing more area for the air to enter the wheel. Panasonic fans are quiet enough that you might not even know they're on. This fan is designed to give you continuous, trouble-free operation for many years due to its high-quality components and permanently lubricated motors which wear at a slower pace. We designed the electrical configuration of this model's condenser motor to allow it to operate at lower temperatures, increasing the life of the motor and bearings. The fan housing is made of heavy-gauge zinc galvanized steel and painted to protect it from rust. This in-line fan fits a 6-Inch duct and can be installed in five different positions and joist, truss and suspension brackets are included to help make your installation as easy as possible. With a 1.4 sone level and rated 240 cubic feet per minute, this fan is Energy Star qualified. The Panasonic FV-20NLF1 WhisperLine 240 CFM In-Line Fan is covered by a manufacturer warranty for period of three years from the date of the original purchase and is sold one item per package.
Read More.
Tags : Panasonic, FV20NLF1, WhisperLine, 240, CFM
Disclaimer :
- 0 comments
-
Posted under
WhisperLine
February 25, 2011 Honeywell 527SHON103BLK 12-Watt Gable Mount Solar Powered Attic Fan
Honeywell 527SHON103BLK 12-Watt Gable Mount Solar Powered Attic Fan
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Honeywell 12 Watt Gable Mount Solar Attic Fan Help reduce energy usage by exhausting hot air from attics or crawl spaces by using a solar powered attic fan. Reduce potential mold and increase roof life by exhausting moist air. A whisper quiet 24 volt motor is powered by an industrial grade 12 watt solar panel powering a 14-inch aluminum blade is thermostatically controlled; if the conditioned space reaches 85 degrees, the motor turns on, and once it cools to 65 degrees, it will shut off. Unit will condition up to 1,250 square feet. Powered by solar energy, there is zero cost usage, and it does not require an electrician to install. Galvanized & powder coated metal components resists rust. Wire mesh keeps unwanted rodents out. Product includes 30 feet of connecting wire so solar panel can be mounted to maximize sun exposure. Solar panel can be attached to roof or exterior wall. Patent pending grommet and cover included to prevent leaks. Limited 5 year warranty on the fan and 20 year warranty on the solar panel. May qualify for federal and/or local tax rebates.
Read More.
Tags : Honeywell, 527SHON103BLK, 12Watt, Gable, Mount
Disclaimer :
- 0 comments
-
Posted under
Mount
February 25, 2011 Cool Attic CX242DDWT Direct Drive 2-Speed Whole House Fan with Shutter 24-Inch White
Cool Attic CX242DDWT Direct Drive 2-Speed Whole House Fan with Shutter 24-Inch White
Check Price, Read Full Product Information and Customer Reviews.
Product information :
This Cool Attic 24-inch direct drive 2-speed whole house fan with shutters will help cool down your home in those hot months. It has a precision-balanced aluminum fan blade assembly with 4 blades, unlike 3 in most competing brands for greater air movement. It has a joist-in/joist out installation and steel venturi for enhanced durability. The shutter is a white powder-coated finish automatic shutter with 95% plus air closure. A wall switch is included with high/low/off settings. It is UL and C-UL listed and comes with a 10 year warranty. This model is designed for up to 1,800 square feet on one story and has a CFM high/low of 4,600/3,200. This unit needs 8 to 10 square feet of net free exhaust area.
Read More.
Tags : Cool, Attic, CX242DDWT, Direct, Drive
Disclaimer :
- 0 comments
-
Posted under
Drive
February 25, 2011 TPI Shutter Mounted Exhaust Fans
TPI Shutter Mounted Exhaust Fans
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Both fan and aluminum shutter can be mounted on the inside of building. TPI Shutter Mounted Exhaust Fans reduce installation costs. Low-pressure direct drive exhaust. Two- and 3-speed 120V totally enclosed motors with pull chain switch. UL-listed and meets OSHA standards.
Read More.
Tags : TPI, Shutter, Mounted, Exhaust, Fans
Disclaimer :
- 0 comments
-
Posted under
TPI
February 25, 2011 Ventamatic CX1500 Power Gable Ventilator Fan
Ventamatic CX1500 Power Gable Ventilator Fan
Check Price, Read Full Product Information and Customer Reviews.
Product information :
Keep your attic cool and ventilated with the power gable ventilator fan. It cools attics up to 1,850 square feet using a 14-inch fan with a 1300 CFM rating. The fan has an adjustable automatic thermostat and prolongs the life of composite roof shingles with lower summer attic temperatures.
Read More.
Tags : Ventamatic, CX1500, Power, Gable, Ventilator
Disclaimer :
- 0 comments
-
Posted under
Ventilator